-25 The cell wall surrounds and holds in the microbe
(74157 Reads)[Prev] | [Next]
- The cell wall in bacteria contains peptidoglycan, a polymer of N-acetyl glucosamine, N-acetyl muramic acid and amino acids.
- Gram-positive cell walls contain a thick layer of peptidoglycan that encircles the cell.
- Gram-negative cell walls contain a thin layer of peptidoglycan between the cytoplasmic membrane and the outer membrane.
This section will restrict itself to the bacterial cell wall, but at the end of the chapter we will compare this to archaeal cell walls. The cell wall is essential to the survival of most microorganisms. Many microbes live in environments in relatively dilute environments and the cell wall's most important function is to prevent the cell from bursting due to the osmotic stress placed upon it as discussed previously in section 2-13. The cell wall also determines the shape of the cell. Any cell that has lost its cell wall, either artificially or naturally, becomes roughly spherical and lyses due to osmotic pressure, unless placed in certain concentrated solutions. Finally, the cell wall helps to support any structure that penetrates from the cell out into the environment.
Figure 2.36. A gram-positive bacterium. A Gram stain of the gram-positive bacterium Bacillus cereus
The structure and synthesis of prokaryotic cell walls is unique and many compounds found in the bacterial cell wall are found nowhere else in nature. It is true that plants also make cell walls, but they are chemically and structurally different. There are two basic types of bacterial cell wall structures that have been studied in detail: gram-positive and gram-negative. These two classes of bacterial cells look very different following staining with the Gram stain and this has been a standard basis for starting to identify different bacterial species. Figures 2-36 and 2-37 show Gram stains of gram-positive and gram-negative bacteria, respectively.
Figure 2.37. A gram-negative bacterium. A Gram stain of the gram-negative bacterium Serratia marcescens.
When the Gram stain was developed by Hans Christian Gram in 1884 the molecular basis of the stain was unknown. In fact very little was understood about bacteria in general. He just determined empirically that when bacterial smears were run through a four-step staining procedure using two different dyes, some cells retained the first dye and stained purple, while other only retained the second dye and stained pink. Years later it was discovered that the basis for this differential reaction relates to the cell wall as shown in Figure 2-38.
Figure 2.38. A comparison of the ultrastructure of gram-positive and gram-negative cells. The different Gram reactions occur because of structural differences between the bacterial cell walls. Gram-positive cells (Group B streptococci) appear smooth in a scanning electron micrograph (A) and are composed of a single layer of peptidoglycan (B). Gram-negative cells (E. coli) have an undulating surface and have three layers (C and D). (Sources: S. H. Pincus, et al. 1992. J. Bacteriol 174:3739-3749 [panels A and B]; M. E. Bayer and C. C. Remsen. 1970. J. Bacteriol. 101:304-313 [panel C]; T. J. Beveridge. 1999. J. Bacteriol. 181:4725-4733 [panel D])
As shown in Figure 2-38, the gram-negative cell has an additional layer and the outside of the cell appears convoluted when compared to the gram-positive cell. The gram-positive wall is much thicker than is the gram-negative wall and its external appearance is smoother. gram-positive and gram-negative cells do share one thing in common that is unique to bacteria - peptidoglycan. We will talk about the structure of this and then move on to examine the various structures found in each cell wall type.
Peptidoglycan is a thick rigid layer composed of an overlapping lattice of two sugars, N-acetyl glucosamine (NAG) and N-acetyl muramic acid (NAM), that are cross-linked by amino acid bridges as shown in Figure 2-39. The exact molecular makeup of these cross-bridges is species-specific. NAM is only found in the cell walls of bacteria and nowhere else. Attached to NAM is a side chain generally composed of four amino acids. In the best-studied bacterial cell walls (E. coli) the cross-bridge is most commonly composed of L-alanine, D-alanine, D-glutamic acid and diaminopimelic acid (DPA).
Figure 2.39. The chemical structure of peptidoglycan. The generalized peptidoglycan monomer showing the two sugars that make up the backbone. The R group consists of four amino acids, with the best-studied cell walls containing L-alanine, D-alanine, D-glutamic acid and diaminopimelic acid.
Note that peptidoglycan contains D-amino acids, which are different than the L-amino acids found in proteins. D-amino acids have the identical composition as L-amino acids, but are their mirror images. The use of D-amino acids is unusual in biology and bacteria have enzymes called racemases to convert between D and L forms specifically for this use.
The NAM, NAG and amino acid side chain form a single peptidoglycan unit that can link with other units via covalent bonds to form a repeating polymer. The polymer is further strengthened by covalent bonds between cross-bridges and the degree of cross-linking determines the degree of rigidity. In the E. coli, the penultimate D-alanine of one unit is linked to DPA of the next cross-bridge. In some gram-positive microbes there is a peptide composed of various amino acids that serves as a link between the cross-bridges. For example, in Staphylococcus aureus strains, five glycines make up the linker between peptidoglycan monomers. The sequence of these linkers varies considerably between species. The completed peptidoglycan layer forms a strong mesh that can be thought of as a chain link fence. The complete cell wall contains one or more layers of peptidoglycan one atop the other, providing much of the strength of the cell wall.
While both gram-negative and gram-positive bacteria have peptidoglycan, its physical arrangement in the cell wall is different. In gram-positive cells the peptidoglycan is a heavily cross-linked woven structure that encircles the cell in many layers. It is very thick with peptidoglycan accounting for 50% of weight of cell and 90% of the weight of the cell wall. Electron micrographs show the peptidoglycan to be 20-80 µm thick. In gram-negative bacteria the peptidoglycan is much thinner with only 15-20% of the cell wall being peptidoglycan and it is only intermittently cross-linked. In both cases peptidoglycan is not a barrier to solutes, as the openings in the mesh are large enough for most molecules including proteins to pass through. Figure 2-40 shows an artist's rendering of what the structure might look like.
Figure 2.40. A cartoon of the peptiodglycan mesh. The peptidoglycan polymers then crosslink with other peptidoglycan chains to form a complex mesh that wraps the cell in a structure a kin to chicken wire.
There are numerous antibacterial agents that target the bacterial cell wall because mammals do not synthesize walls and therefore are not susceptible to the toxic effects of these agents. Penicillin inhibits the linking of the amino acid side chains of peptidoglycan units, which therefore weakens the stability of the wall eventually, causing the cells to rupture. Humans and other animals even synthesize an enzyme that specifically attacks bacterial cell walls. The enzyme lysozyme is found in many body fluids and hydrolyzes the NAM-NAG bond in the cell wall. It serves as a critical part of the mammalian defense against bacterial invasion. Figure 2-41 shows a depiction of the gram-positive cell wall.
Figure 2.41. The gram-positive cell wall. The cell wall is made mostly of peptidoglycan, interspersed with teichoic acid which knits the different layers together. The amount of crosslinking is higher and the wall is thicker than in gram-negative cell walls.
The gram-positive cell wall
Another structure in the gram-positive cell wall is teichoic acid. It is a phosphodiester polymer of glycerol or ribitol joined by phosphate groups. Amino acids such as D-alanine are attached. Teichoic acid is covalently linked to muramic acid and stitches various layers of the peptidoglycan mesh together. Teichoic acid stabilizes the cell wall and makes it stronger. The chemical formula of teichoic acid is shown in Figure 2-42
Figure 2.42. Teichoic acid. Teichoic acid is a long, thin molecule that weaves through the peptidoglycan.
Gram-negative cell structure
Gram-negative cell walls have a more complicated structure than do those of gram-positive organisms. Outside the cytoplasmic membrane is the periplasm, which contains the thin layer of peptidoglycan. The peptidoglycan in gram-negative cells contains less cross-linking than in gram-positive cells with no peptide linker. Covalently bound to the peptidoglycan is Braun's lipoprotein, which has a hydrophobic anchor in the outer membrane that helps to strongly bind the peptidoglycan to the outer membrane. Figure 2-43 shows the arrangement of the gram-negative cell wall.
Figure 2.43. The gram-negative cell wall. The cell wall in gram-negative bacteria contains much less peptidoglycan and is surrounded by an outer membrane. There is much less crosslinking between the peptidoglycan. LPS is also present in the outer membrane and penetrates into the surrounding environment.
The outer membrane
The outer membrane of gram-negative bacteria is another lipid bilayer similar to the cytoplasmic membrane, and contains lipids, proteins, and also lipopolysaccharides (LPS). The membrane has distinctive sides, with the side that faces the outside containing all the LPS. LPS is composed of two parts: Lipid A and the polysaccharide chain that reaches out into the environment. Lipid A is a derivative of two NAG units with up to 7 hydrophobic fatty acids connected to it that anchor the LPS in the membrane as shown in Figure 2-44. Attached to Lipid A is a conserved core polysaccharide that contains KDO, heptose, glucose and glucosamine sugars. The rest of the polysaccharide consists of repeating sugar units and this is called the O-antigen. The O-antigen varies among bacterial species and even among various isolates of the same species. Many bacterial pathogens vary the make-up of the O-antigen in an effort to avoid recognition by the host's immune system.
Figure 2.44. The structure of LPS. LPS is composed of three sections: the lipid A region, a conserved core polysaccharide, and a highly variable O-polysaccharide. (A) The chemical structure of LPS. (B) A molecular model of the membrane from Pseudomonas aeruginosa. Source (T. P. Straatsma, Pacific Northwest National Laboratory)
LPS confers a negative charge and also repels hydrophobic compounds including certain drugs and disinfectants that would otherwise kill the cell. Some gram-negative species live in the gut of mammals and LPS repels fat-solubilizing molecules such as bile that the gal bladder secretes. This repulsion enables these bacteria to survive in this environment. The O-antigen and other molecules on the outer membrane are also used by certain viruses that infect bacteria, as a means to identify the correct hosts for infection.
LPS is medically important because when LPS is released from bacterial cells it is toxic to mammals and is therefore called endotoxin. It creates a wide spectrum of physiological reactions including the induction of a fever (endotoxins are said to be pyrogenic), changes in white blood cell counts, leakage from blood vessels, tumor necrosis and lowered blood pressure leading to vascular collapse and eventually shock. At high enough concentrations the LPS endotoxin is lethal. Finally, the outer membrane keeps the enzymes in the periplasm from floating away from the cell.
There are fewer total proteins and fewer unique types of proteins in the outer membrane than in the cytoplasmic membrane. Porins are particularly important components because of their role in the permeability of the outer membrane to small molecules. Porins are proteins that form pores in the outer membrane large enough to allow passage of most small hydrophilic molecules. Figure 2-45 shows the structure of a porin at the molecular scale. All known porins have a similar structure, with the protein containing a central channel that allows the passage of molecules. This allows migration of these molecules into the periplasmic space for possible transport across the cytoplasmic membrane. Some porins in the outer membrane are general, doing simple discrimination on size and charge, but having little substrate specificity. Examples include OmpF that is selective for positively charged molecules and PhoE that is permeable to negatively charged molecules. Other porins are more specific. The best studied is LamB, which recognizes the sugar polymer maltooligosaccharide and transports it through the outer membrane. Very large or hydrophobic molecules cannot penetrate the outer membrane, so the outer membrane serves as a permeability barrier to at least some molecules.
Figure 2.45. The structure of a porin. The molecular structure of a porin. The view in (A) is from the outside of the cell looking at the membrane surface. The view in (B) is the perspective from the side (i.e. from the membrane). The porin has three protein subunits and the actual pore is the central triangular area in the top panel formed by the three subunits.
There are also other types of outer membrane proteins that are involved in various functions. OmpA in E. coli seems to connect the outer membrane to the peptidoglycan. Some pathogens contain outer membrane proteins that help them neutralize host defenses. Finally all gram-negative bacteria contain high molecular weight proteins involved in the uptake of large substrates such as iron-complexes and vitamin B12.
The differences between the cell walls of gram-positive and gram-negative bacteria greatly influence the success of the microbes in their environments. The thick cell wall of gram-positive cells allows them to do better in dry conditions because it reduces water loss. The outer membrane and its LPS helps gram-negative cells excel in the intestines and other host environments. Figure 2-65 summarizes the difference between gram-negative and gram-positive cell walls.
|Thickness of wall||20-80 nm||10 nm|
|Number of layers in wall||1||2|
|Teichoic acid in wall||+||-|
|Lipid and lipoprotein content||0-3%||58%|
|Sensitive to penicillin||Yes||Less sensitive|
|Digested by lysozyme||Yes||Weakly|
Figure 2.65. Properties of cell walls. A summary of the differences between gram-positive and gram-negative cell walls.